onsemi MOC3012M Triac Output Optocoupler DIP-6
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | MOC3012 Optocoupler 6 Pin Dip | 15 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 15 EGP
About this product
The MOC3012M is a 6-pin DIP optocoupler with a triac (two-way thyristor) output. It isolates low-voltage logic from AC circuits and is used to trigger the gate of an external triac in mains switching, lighting and motor control designs. It has no zero-crossing circuit.
Specifications
- Number of outputs
- 1
- Isolation voltage (RMS)
- 4170 V
- Forward current
- 60 mA
- Peak repetitive off-state voltage (Vdrm)
- 250 V
- Forward voltage
- 1.15 V
- Output type
- Two-way thyristor (triac)
- Zero crossing circuit
- No
- Operating temperature
- -40 °C to +85 °C
Frequently asked questions
What is the price of onsemi MOC3012M Triac Output Optocoupler DIP-6 in Egypt?
onsemi MOC3012M Triac Output Optocoupler DIP-6 currently costs 15 EGP in Egypt.
Where can I buy onsemi MOC3012M Triac Output Optocoupler DIP-6 in Egypt?
onsemi MOC3012M Triac Output Optocoupler DIP-6 is available from Makers Electronics. Compare the offers above to find the best price.
Can MOC3012M switch mains loads directly?
No. Its output is a triac driver that only triggers the gate of an external triac, and the triac switches the AC load. The optocoupler itself is not intended to carry the load current.
How do I wire the LED side and the triac side?
Drive pins 1 and 2 (the internal LED) from a logic output through a series resistor sized for the 60 mA forward current rating. Connect pins 4 and 6 (MT2 and MT1) to the gate circuit of the external triac, following the datasheet application circuit.
