0.91 inch OLED Display 128x32 I2C (SSD1306), Blue
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Future ElectronicsCheapest | OLED Display I2C 4 Pin 0.91 without tin soldering | 145 EGP | View in store |
 UGE | Color Graphic 0.91 | 217 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 145 EGP
About this product
A 0.91-inch monochrome blue OLED display with 128 x 32 pixels, driven by an SSD1306 controller over I2C. As a self-emissive display it needs no backlight and uses less power than a traditional LCD. It is popular for status screens in Arduino, ESP32 and Raspberry Pi projects.
Specifications
- Driver IC
- SSD1306
- Size
- 0.91 inch
- Resolution
- 128 x 32
- Interface
- I2C
- Display color
- Blue
- Supply voltage (VCC)
- 3.3 - 5 V
Frequently asked questions
What is the price of 0.91 inch OLED Display 128x32 I2C (SSD1306), Blue in Egypt?
0.91 inch OLED Display 128x32 I2C (SSD1306), Blue currently costs between 145 and 217 EGP across 2 offers in Egypt.
Where can I buy 0.91 inch OLED Display 128x32 I2C (SSD1306), Blue in Egypt?
0.91 inch OLED Display 128x32 I2C (SSD1306), Blue is available from Future Electronics and UGE. Compare the offers above to find the best price.
What I2C address does this OLED use?
Most SSD1306 I2C modules use address 0x3C, while some use 0x3D. Run an I2C scanner sketch to confirm the address of your module before writing code.
How do I wire it to an Arduino or ESP32?
Connect VCC to 3.3 V or 5 V as the module supports, GND to ground, SDA to the board's SDA pin and SCL to its SCL pin. The listing mentions 'without tin soldering', so confirm the 4-pin header is soldered before wiring.
