0.96 Inch I2C OLED Display Module 128x64 Blue SSH1106 4-Pin
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Microohm | 0.96 Inch I2C/IIC 4-Pin OLED Display Module Blue | 160 EGP250 | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 160 EGP
About this product
A 0.96-inch blue OLED module with a 128 x 64 pixel display, driven by the SSH1106 controller and connected over I2C (IIC) through a 4-pin header. It operates from 3.3 to 5 V, which suits Arduino, ESP32, ESP8266 and Raspberry Pi projects that need a small display for sensor readings, menus or status information.
Specifications
- Size
- 0.96 inch
- Resolution
- 128 x 64
- Controller
- SSH1106
- Display area
- 21.74 x 10.86 mm
- Driving voltage
- 3.3-5V
- Operating temperature
- -40~70 °C
- Interface
- IIC (I2C)
- Light color
- Blue
Frequently asked questions
What is the price of 0.96 Inch I2C OLED Display Module 128x64 Blue SSH1106 4-Pin in Egypt?
0.96 Inch I2C OLED Display Module 128x64 Blue SSH1106 4-Pin currently costs 160 EGP in Egypt.
Where can I buy 0.96 Inch I2C OLED Display Module 128x64 Blue SSH1106 4-Pin in Egypt?
0.96 Inch I2C OLED Display Module 128x64 Blue SSH1106 4-Pin is available from Microohm. Compare the offers above to find the best price.
Which pins do I connect for I2C wiring?
The module has four pins: GND, VCC, SCL and SDA. Connect VCC to 3.3 V or 5 V within the listed range, and connect SCL and SDA to the I2C pins of your board. Confirm the pin labels on the module, as the order can differ between boards.
Which library should I use for this OLED?
Use a driver for the SH1106 controller, such as the U8g2 library. Libraries written only for SSD1306 may show an offset or a shifted image on SH1106 modules.
