0.96 inch OLED Graphic Display 128x64 I2C (SSD1306)
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Circuits Electronics | OLED Graphic LCD 128x64 | 180 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 180 EGP
About this product
A 0.96-inch blue monochrome OLED graphic module with 128 x 64 pixels, driven by the SSD1306 controller over I2C. It has built-in voltage generation, so one 3.3 V to 5 V supply is enough and no backlight is needed. Used for sensor readouts, menus and small graphics in Arduino and ESP32 projects.
Specifications
- Resolution
- 128 x 64 pixels
- Diagonal size
- 0.96 inch
- Controller IC
- SSD1306 or equivalent
- Interface
- I2C
- Operating voltage
- 3.3 V - 5 V
- Display type
- OLED, blue
Frequently asked questions
What is the price of 0.96 inch OLED Graphic Display 128x64 I2C (SSD1306) in Egypt?
0.96 inch OLED Graphic Display 128x64 I2C (SSD1306) currently costs 180 EGP in Egypt.
Where can I buy 0.96 inch OLED Graphic Display 128x64 I2C (SSD1306) in Egypt?
0.96 inch OLED Graphic Display 128x64 I2C (SSD1306) is available from Circuits Electronics. Compare the offers above to find the best price.
How do I wire this OLED to an Arduino Uno?
Connect VCC to 5 V or 3.3 V within the module's supported range, GND to GND, SDA to A4 and SCL to A5 on the Uno. Then use an I2C library such as Adafruit SSD1306 or U8g2.
What I2C address does it use?
Most SSD1306 modules use address 0x3C, while some use 0x3D. Run an I2C scanner sketch to confirm the address of your module before writing the code.
