MDP16-1-151 Bussed Resistor Network 150Ω DIP-16
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | MDP16-1-151 Bussed Resistor Networks 150Ω DIP-16 | 75 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 75 EGP
About this product
The MDP16-1-151 is a bussed resistor network with 15 resistors of 150Ω each sharing one common pin, housed in a 16-pin DIP package. Each element is rated at 0.125W with ±2% tolerance. It is used for pull-up and pull-down arrays on microcontroller inputs and logic lines, saving board space compared with discrete resistors.
Specifications
- Resistance
- 150Ω
- Resistors per network
- 15 + common pin
- Package
- DIP-16
- Power per element
- 0.125W
- Tolerance
- ±2%
- Configuration
- Bussed (common pin)
Frequently asked questions
What is the price of MDP16-1-151 Bussed Resistor Network 150Ω DIP-16 in Egypt?
MDP16-1-151 Bussed Resistor Network 150Ω DIP-16 currently costs 75 EGP in Egypt.
Where can I buy MDP16-1-151 Bussed Resistor Network 150Ω DIP-16 in Egypt?
MDP16-1-151 Bussed Resistor Network 150Ω DIP-16 is available from Makers Electronics. Compare the offers above to find the best price.
How do I wire the common pin?
Connect the common pin to VCC for a pull-up array or to GND for a pull-down array, then connect each other pin to one signal line. Confirm which pin is common in the datasheet pinout before wiring.
Can I use it with 5V logic?
At 3.3V the worst-case power per element is about 0.07W, which is within rating. At 5V it is about 0.17W, which exceeds the 0.125W rating when a line is held low. For 5V systems, choose a higher resistance value.
