MDP16-1-121 Bussed Resistor Network 120Ω DIP-16
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | MDP16-1-121 BUSSED RESISTOR NETWORKS 120Ω DIP-16 | 75 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 75 EGP
About this product
The MDP16-1-121 is a bussed resistor network with 15 resistors of 120Ω each sharing one common pin, housed in a 16-pin DIP package. Each element is rated at 0.125W with ±2% tolerance. It is used for pull-up and pull-down arrays on microcontroller inputs and logic lines, saving board space compared with discrete resistors.
Specifications
- Resistance
- 120Ω
- Resistors per network
- 15 + common pin
- Package
- DIP-16
- Power per element
- 0.125W
- Tolerance
- ±2%
- Configuration
- Bussed (common pin)
Frequently asked questions
What is the price of MDP16-1-121 Bussed Resistor Network 120Ω DIP-16 in Egypt?
MDP16-1-121 Bussed Resistor Network 120Ω DIP-16 currently costs 75 EGP in Egypt.
Where can I buy MDP16-1-121 Bussed Resistor Network 120Ω DIP-16 in Egypt?
MDP16-1-121 Bussed Resistor Network 120Ω DIP-16 is available from Makers Electronics. Compare the offers above to find the best price.
How do I wire the common pin?
Connect the common pin to VCC for a pull-up array or to GND for a pull-down array, then connect each other pin to one signal line. Confirm which pin is common in the datasheet pinout before wiring.
Is 120Ω suitable for 5V logic?
At 3.3V the worst-case power per element is about 0.09W, within rating. At 5V it is about 0.21W, which exceeds the 0.125W rating when a line is held low. For 5V systems, use a higher resistance value.
