TowerPro SG90 Micro Servo 360° Continuous Rotation
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Most ElectronicsCheapest | Servo Motor SG90 360 Degree (Plastic Gear) | 84.9 EGP102 | View in store |
 Makers Electronics | SG90 Micro Servo Continuous Rotation 0:360 Degree | 85 EGP | View in store |
 Ekostra | SG90 Micro Servo Motor 360 Degree 1.8kg.cm Plastic Gears | 100 EGP | View in store |
 Microohm | Micro Servo SG90 360 Degree continuous | 115 EGP125 | View in store |
 UGE | Servo Motor 360 degree continuous Rotation SG-90 | 175 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 84.9 EGP
About this product
The TowerPro SG90 continuous-rotation micro servo, where the control signal sets the speed and direction of rotation instead of a fixed angle. It comes with a 3-wire cable (signal, +, -) and mounting hardware, and suits small robots, wheeled platforms and mechatronic projects.
Specifications
- Operating voltage
- 4.8 ~ 6.0 V
- Operating speed
- 0.12 sec/60° (4.8V) ~ 0.1 sec/60° (6.0V)
- Torque
- 1.6 kg.cm (4.8V)
- Temperature range
- -30 ~ +60 °C
- Cable length
- 25 cm
- Servo type
- Analog
- Wiring
- Orange: Signal, Red: +V, Brown: -V
Frequently asked questions
What is the price of TowerPro SG90 Micro Servo 360° Continuous Rotation in Egypt?
TowerPro SG90 Micro Servo 360° Continuous Rotation currently costs between 84.9 and 175 EGP across 5 offers in Egypt.
Where can I buy TowerPro SG90 Micro Servo 360° Continuous Rotation in Egypt?
TowerPro SG90 Micro Servo 360° Continuous Rotation is available from Most Electronics, Makers Electronics, Ekostra, Microohm, and UGE. Compare the offers above to find the best price.
How do I control speed and direction?
Send a PWM pulse train of about 50 Hz. A pulse near 1.5 ms usually means stop, shorter pulses turn one way and longer pulses turn the other way. The exact stop point varies per unit, so calibrate it in your code.
How do I wire it to an Arduino?
Connect the orange wire to a PWM pin, the red wire to a 4.8V to 6V supply and the brown wire to ground. Share the ground between the servo supply and the microcontroller, and use a separate supply for several servos.
