SN65HVD230 3.3V CAN Bus Transceiver Module
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | SN65HVD230 3.3V CAN BUS Transceiver Communication Module | 165 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 165 EGP
About this product
The SN65HVD230 is a 3.3 V CAN bus transceiver that converts a microcontroller's CAN TX and RX logic signals to the differential CAN bus. It supports data rates up to 1 Mb/s, offers thermal protection and low standby current, and allows up to 120 nodes on the bus. It is used in CAN networks for vehicles, machines and robots.
Specifications
- Supply voltage
- 3.3 V
- Maximum data rate
- 1 Mb/s
- Standby current (typical)
- 370 µA
- Maximum nodes on bus
- 120
- Interface
- CAN bus (differential)
Frequently asked questions
What is the price of SN65HVD230 3.3V CAN Bus Transceiver Module in Egypt?
SN65HVD230 3.3V CAN Bus Transceiver Module currently costs 165 EGP in Egypt.
Where can I buy SN65HVD230 3.3V CAN Bus Transceiver Module in Egypt?
SN65HVD230 3.3V CAN Bus Transceiver Module is available from UGE. Compare the offers above to find the best price.
Do I need a termination resistor?
Usually yes. CAN bus typically needs a 120 ohm termination resistor at each physical end of the bus. Only the two far ends should be terminated, not every module.
How do I connect it to a microcontroller?
Connect VCC to 3.3 V, GND to ground, TXD to the MCU CAN TX pin, RXD to the CAN RX pin, and CANH and CANL to the bus. Its logic pins are 3.3 V, so use a level shifter when connecting to 5 V microcontrollers.
