Sharp GP2Y10 Dust Sensor - Air Quality Sensor (Analog Output)
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 RAM Electronics | Dust Sensor - Air Quality Sensor | 350 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 350 EGP
About this product
Sharp GP2Y10-series optical dust sensor that measures airborne dust density using an infrared LED and a phototransistor. It outputs an analog voltage proportional to dust concentration, which makes it useful for air quality monitors and indoor air projects built around a microcontroller.
Specifications
- Supply voltage
- 4.5 to 5.5 V DC (GP2Y1010AU0F datasheet)
- Output
- Analog voltage proportional to dust density
- Sensitivity
- 0.5 V per 0.1 mg/m³ (typical)
- Sensing method
- Optical (infrared LED and phototransistor)
- Operating temperature
- -10 to 65 °C
Frequently asked questions
What is the price of Sharp GP2Y10 Dust Sensor - Air Quality Sensor (Analog Output) in Egypt?
Sharp GP2Y10 Dust Sensor - Air Quality Sensor (Analog Output) currently costs 350 EGP in Egypt.
Where can I buy Sharp GP2Y10 Dust Sensor - Air Quality Sensor (Analog Output) in Egypt?
Sharp GP2Y10 Dust Sensor - Air Quality Sensor (Analog Output) is available from RAM Electronics. Compare the offers above to find the best price.
How do I wire the GP2Y10 dust sensor to an Arduino?
Connect VCC to 5 V, GND to ground, and Vout to an analog input such as A0. The LED pin must be pulsed on a timed sequence, and the datasheet circuit uses a 150 Ω resistor on the LED line and a 220 µF capacitor on the supply.
What supply voltage does it need and how should the output be read?
It runs from 4.5 to 5.5 V DC. The output is an analog voltage that rises with dust density, so convert the ADC reading to voltage and calibrate against a reference if you need absolute concentration values.
