Raspberry Pi CAN 2.0 Bus Shield MCP2515 with MCP2551
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | Raspberry Pi Can 2.0 Bus Shield MCP2515 Controller MCP2551 Transceiver | 713 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 713 EGP
About this product
A shield for Raspberry Pi that adds CAN 2.0 bus connectivity. It uses an MCP2515 SPI CAN controller and an MCP2551 CAN transceiver, and plugs into the 40-pin GPIO header. It is used in CAN bus experiments for automotive, robotics and industrial projects. A simple voltage divider is used on the TX line only.
Specifications
- CAN controller
- MCP2515 (SPI)
- CAN transceiver
- MCP2551
- Number of channels
- 1
- Control signal voltage
- 3.3 V
- Transceiver supply
- 5 V
- Connector
- 40-pin GPIO header
- Dimensions
- 45 mm × 25 mm
Frequently asked questions
What is the price of Raspberry Pi CAN 2.0 Bus Shield MCP2515 with MCP2551 in Egypt?
Raspberry Pi CAN 2.0 Bus Shield MCP2515 with MCP2551 currently costs 713 EGP in Egypt.
Where can I buy Raspberry Pi CAN 2.0 Bus Shield MCP2515 with MCP2551 in Egypt?
Raspberry Pi CAN 2.0 Bus Shield MCP2515 with MCP2551 is available from UGE. Compare the offers above to find the best price.
Which Raspberry Pi boards can I use this shield with?
It is designed for Raspberry Pi boards with the 40-pin GPIO header, such as the Raspberry Pi 3 and 4. Confirm the header pinout and that the board's SPI interface is enabled in the operating system before use.
Do I need termination resistors on the CAN bus?
The CAN bus normally needs a 120 Ω termination resistor at each physical end of the network. The shield itself does not replace these resistors, so add them according to your bus layout.
