ElectronicsEgypt
IRFP150N N-Channel Power MOSFET 100V 42A TO-247

IRFP150N N-Channel Power MOSFET 100V 42A TO-247

Part number: IRFP150NBrand: International RectifierTransistors & MOSFETs

Lowest price now

35 EGP

3 offers · 3 storesSave up to 30%

View in store: Future Electronics

Prices updated: 14 Oct 2026

Compare prices

StorePriceView in store
Future Electronics logoFuture ElectronicsCheapest35 EGPView in store
RAM Electronics logoRAM Electronics40 EGPView in store
Makers Electronics logoMakers Electronics50 EGPView in store

Price history

Lowest daily price, last 90 days

35.533534.4812 Oct 202614 Oct 2026

Lowest price recorded: 35 EGP

About this product

The IRFP150N is an N-channel power MOSFET rated at 100 V and 42 A, with a low on-resistance of 0.036 Ω in a TO-247 package for mounting on a heatsink. It is used in switching stages such as DC motor drivers, power supplies, inverters and high-current load switching. It is not a logic-level device, so its gate needs a suitable driver stage.

Specifications

Type
N-Channel Power MOSFET
Drain-source voltage (VDSS)
100 V
Continuous drain current
42 A
On-resistance (RDS(on))
0.036 Ω
Package
TO-247
Technology
HEXFET (5th generation)

Frequently asked questions

What is the price of IRFP150N N-Channel Power MOSFET 100V 42A TO-247 in Egypt?

IRFP150N N-Channel Power MOSFET 100V 42A TO-247 currently costs between 35 and 50 EGP across 3 offers in Egypt.

Where can I buy IRFP150N N-Channel Power MOSFET 100V 42A TO-247 in Egypt?

IRFP150N N-Channel Power MOSFET 100V 42A TO-247 is available from Future Electronics, RAM Electronics, and Makers Electronics. Compare the offers above to find the best price.

Can I drive the gate directly from an Arduino pin?

Not reliably. The IRFP150N needs about 10 V on the gate for full turn-on, while a 5 V microcontroller pin is usually too weak to switch it fully. Use a gate driver stage and include a gate resistor.

How are the pins arranged on the TO-247 package?

With the front face toward you and the leads pointing down, the pins are Gate, Drain and Source from left to right. The metal tab is connected to the drain, so use an insulating washer when mounting it on a grounded heatsink.