IRFP4710 N-Channel Power MOSFET 100V 72A 190W TO-247
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | IRFP4710 N-Channel Power MOSFET Transistor 100V 72A 190W TO-247 | 80 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 80 EGP
About this product
The IRFP4710 is a high-power N-channel MOSFET rated at 100 V and 72 A in a TO-247 package, with a maximum on-resistance of 14 mΩ at 10 V gate drive. It is commonly used as a switch in DC-DC converters, motor drivers and high-current power stages. Mount it on a heatsink for loads close to its power limit.
Specifications
- Channel type
- N-Channel
- Drain-source voltage (VDSS)
- 100 V
- Continuous drain current
- 72 A
- Max RDS(on) at VGS = 10 V
- 14 mΩ
- Power dissipation
- 190 W
- Package
- TO-247
Frequently asked questions
What is the price of IRFP4710 N-Channel Power MOSFET 100V 72A 190W TO-247 in Egypt?
IRFP4710 N-Channel Power MOSFET 100V 72A 190W TO-247 currently costs 80 EGP in Egypt.
Where can I buy IRFP4710 N-Channel Power MOSFET 100V 72A 190W TO-247 in Egypt?
IRFP4710 N-Channel Power MOSFET 100V 72A 190W TO-247 is available from Makers Electronics. Compare the offers above to find the best price.
Can I drive the IRFP4710 directly from an Arduino pin?
Not reliably. Its on-resistance is specified at 10 V gate drive, and a 5 V microcontroller pin usually cannot fully turn it on, so it will run hot. Use a gate driver or a logic-level MOSFET for microcontroller control.
How do I wire it as a low-side switch?
Connect the load between the supply positive and the drain, connect the source to ground, and drive the gate through a series resistor (about 10 to 100 Ω) with a pull-down resistor (around 10 kΩ) from gate to source to keep it off. For inductive loads such as motors or relays, add a flyback diode across the load.
