EVERLIGHT 6N136 High-Speed Optocoupler 1Mbit/s DIP-8
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | EVERLIGHT 6N136 High Speed Optocouplers 1Mb High Speed DC Input DIP-8 | 25 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 25 EGP
About this product
The 6N136 is a high-speed optocoupler with a 1 Mbit/s data rate and DC input, used to isolate logic signals between circuits that have different grounds or voltages. Typical uses include digital communication, telecommunication and motor drive interfaces. Packaged in an 8-pin DIP.
Specifications
- Data rate
- 1 Mbit/s (as listed)
- Input type
- DC
- Isolation voltage
- 5000 Vrms (as listed)
- Operating temperature
- -55°C to 100°C (as listed)
- Package
- DIP-8
Frequently asked questions
What is the price of EVERLIGHT 6N136 High-Speed Optocoupler 1Mbit/s DIP-8 in Egypt?
EVERLIGHT 6N136 High-Speed Optocoupler 1Mbit/s DIP-8 currently costs 25 EGP in Egypt.
Where can I buy EVERLIGHT 6N136 High-Speed Optocoupler 1Mbit/s DIP-8 in Egypt?
EVERLIGHT 6N136 High-Speed Optocoupler 1Mbit/s DIP-8 is available from Makers Electronics. Compare the offers above to find the best price.
Does the 6N136 output need a pull-up resistor?
Yes. The output is open-collector, so it needs a pull-up resistor from the output pin to the supply on the output side. Its value depends on your supply voltage and the speed required, so check the datasheet.
How do I drive the LED side from a microcontroller?
Drive the input LED through a current-limiting resistor from a logic output, with the input side powered from its own supply. Keep the output-side ground separate from the input-side ground, since isolation depends on that separation.
