EC11 Rotary Encoder with Push Button, 5-Pin, 15 mm Shaft
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Most Electronics | EC11 Rotary Encoder With Push Button Switch 5pin 15mm | 27.9 EGP34.2 | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 27.9 EGP
About this product
The EC11 is a rotary encoder with an integrated momentary push button, supplied with a 15 mm shaft and a 5-pin interface. It outputs quadrature digital pulses as the knob turns, for controlling volume, speed or menu navigation, while the push button adds a select or reset input. It mounts on panels or PCBs.
Specifications
- Part number
- EC11
- Pins
- 5
- Shaft length
- 15 mm
- Rotary output
- Quadrature digital pulses (A/B)
- Push button
- Momentary
- Mounting
- Panel or PCB
Frequently asked questions
What is the price of EC11 Rotary Encoder with Push Button, 5-Pin, 15 mm Shaft in Egypt?
EC11 Rotary Encoder with Push Button, 5-Pin, 15 mm Shaft currently costs 27.9 EGP in Egypt.
Where can I buy EC11 Rotary Encoder with Push Button, 5-Pin, 15 mm Shaft in Egypt?
EC11 Rotary Encoder with Push Button, 5-Pin, 15 mm Shaft is available from Most Electronics. Compare the offers above to find the best price.
How do I wire the EC11 to an Arduino?
Connect the common pin to GND, the A and B outputs to two digital input pins, and the push button's two pins to GND and another digital input. Use interrupt-capable pins where possible, enable internal pull-ups or add hardware debouncing, and read the rotation with a library such as Encoder for Arduino.
Does it work with 3.3 V boards like the ESP32?
Yes. The EC11 contains passive switch contacts, so its logic level is set by the microcontroller's input pull-up. Use a 3.3 V board such as ESP32 with internal pull-ups enabled, and keep the input voltage within the board's limits.
