1.3 Inch I2C OLED Display Module 128x64 Blue/White
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | OLED Display Module I2C 4 Pin 1.3″ | 265 EGP | View in store |
 RAM Electronics | OLED 1.3" 4pin LCD Display Module I2C IIC Communicate | 265 EGP | View in store |
 Microohm | OLED 1.3 Inch I2C IIC 4 pin OLED Display Module Blue | 325 EGP350 | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 265 EGP
About this product
A 1.3-inch monochrome OLED display module with a 128x64 pixel resolution, controlled over a 4-pin I2C interface. It is compatible with 3.3 V and 5 V systems and has a wide viewing angle, so it suits showing sensor readings, menus and status on Arduino, ESP32 and Raspberry Pi projects.
Specifications
- Display size
- 1.3 inch
- Resolution
- 128 x 64 pixels
- Display type
- Monochrome OLED
- Color
- Blue, White
- Interface
- I2C, 4-pin
- Operating voltage
- 3.3 V and 5 V compatible
- Operating temperature
- -30 °C to +70 °C
- Viewing angle
- Greater than 160°
Frequently asked questions
What is the price of 1.3 Inch I2C OLED Display Module 128x64 Blue/White in Egypt?
1.3 Inch I2C OLED Display Module 128x64 Blue/White currently costs between 265 and 325 EGP across 3 offers in Egypt.
Where can I buy 1.3 Inch I2C OLED Display Module 128x64 Blue/White in Egypt?
1.3 Inch I2C OLED Display Module 128x64 Blue/White is available from Makers Electronics, RAM Electronics, and Microohm. Compare the offers above to find the best price.
How do I wire the I2C OLED module to an Arduino Uno?
Connect VCC to 5V or 3.3V, GND to GND, SDA to A4 and SCL to A5. Check the pin labels printed on your module, since the pin order can differ between boards.
Which library should I use for this OLED display?
Libraries such as Adafruit SSD1306 or U8g2 support 128x64 I2C OLED modules. Confirm the driver chip printed on the module, because some 1.3-inch modules use the SH1106 driver, which needs a matching library or driver setting.
