0.96 Inch OLED Display Module 128x64 I2C SH1106 White
Currently unavailable
No store has this product in stock right now. Prices below are the last ones we recorded.
Prices updated: 13 Oct 2026
Price history
Lowest daily price, last 90 days
Not enough price history yet.
About this product
A 0.96-inch monochrome white OLED module with 128x64 pixels, driven by an SH1106 controller over I2C. Used for text, sensor readouts and simple graphics in Arduino, ESP32 and Raspberry Pi projects. Accepts a 3.3-5 V supply.
Specifications
- Size
- 0.96 inch
- Resolution
- 128 x 64
- Controller chip
- SH1106
- Interface
- I2C (4-pin)
- Driving voltage
- 3.3-5 V
- Display area
- 21.74 x 10.86 mm
- Operating temperature
- -40 to 70 °C
- Light color
- White
Frequently asked questions
Is it compatible with SSD1306 libraries?
The SH1106 is similar but has 132 columns of RAM for 128 visible pixels, so SSD1306 sketches can show a shifted or garbled image. Use a driver that supports SH1106, such as the U8g2 library, or adjust the column offset.
How do I wire it to an Arduino or ESP32?
Connect GND to ground, VCC to 3.3 V or 5 V, SCL to the I2C clock pin and SDA to the I2C data pin of your board. Many modules use address 0x3C, but check your module's label or scan the bus with an I2C scanner.
