YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×3.1mm
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | TS-E004 SMD Tactile Switch 4 Pin 6.2×6.2×3.1mm | 2 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 2 EGP
About this product
YIYUAN TS-E004 is a low-profile SMD tactile switch with a 6.2 × 6.2 × 3.1 mm body, designed for momentary push-button input on printed circuit boards. Its tactile feel gives clear press feedback, which makes it suitable for reset, mode and user-interface buttons in DIY projects and prototype boards.
Specifications
- Package
- SMD
- Dimensions
- 6.2 × 6.2 × 3.1 mm
- Number of pins
- 4
- Actuation type
- Momentary (tactile)
- Datasheet
- YTS-E004-2B
- Certifications
- RoHS / REACH
Frequently asked questions
What is the price of YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×3.1mm in Egypt?
YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×3.1mm currently costs 2 EGP in Egypt.
Where can I buy YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×3.1mm in Egypt?
YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×3.1mm is available from Makers Electronics. Compare the offers above to find the best price.
How do I wire the 4-pin tactile switch?
The two pins on each side of the switch are internally connected. Connect one side to the microcontroller input (GPIO) and the other side to GND, then use an internal or external pull-up resistor so the input reads high when the button is released.
Can I mount it on a through-hole board?
No. This is an SMD part, so it must be soldered to matching SMD pads using reflow or hot-air soldering. Confirm that your PCB footprint matches the 6.2 × 6.2 mm body before ordering a board layout.
