YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×2.5mm
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | TS-E004 SMD Tactile Switch 4 Pin 6.2×6.2×2.5mm | 2 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 2 EGP
About this product
YIYUAN TS-E004 in the 2.5 mm height version is a low-profile SMD tactile switch with a 6.2 × 6.2 × 2.5 mm body. It provides momentary push-button input with tactile feedback on printed circuit boards, and its lower profile suits compact boards and thin enclosures where a taller switch would not fit.
Specifications
- Package
- SMD
- Dimensions
- 6.2 × 6.2 × 2.5 mm
- Number of pins
- 4
- Actuation type
- Momentary (tactile)
- Datasheet
- YTS-E004-2A
- Certifications
- RoHS / REACH
Frequently asked questions
What is the price of YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×2.5mm in Egypt?
YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×2.5mm currently costs 2 EGP in Egypt.
Where can I buy YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×2.5mm in Egypt?
YIYUAN TS-E004 SMD Tactile Switch 4-Pin 6.2×6.2×2.5mm is available from Makers Electronics. Compare the offers above to find the best price.
What is the difference between this and the 3.1 mm version?
Both share the same 6.2 × 6.2 mm footprint and the same TS-E004 part number. This version is 2.5 mm high, while the other is 3.1 mm high, so choose based on the height available in your enclosure or board stack-up.
How do I wire the 4-pin switch to a microcontroller?
The two pins on each side are internally connected. Wire one side to a GPIO input and the other side to GND, and enable an internal pull-up or add an external pull-up resistor so the input is high when the button is not pressed.
