WS2811 Addressable RGB LED Module 12V 3-LED IP67 Waterproof
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 MicroohmCheapest | WS2811 Addressable RGB LED Module DC 12V – 3LED Waterproof Pixel Light | 17 EGP20 | View in store |
 Makers Electronics | WS2811 Addressable RGB LED 12V | 17 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 17 EGP
About this product
WS2811 addressable RGB LED module with three 5050 SMD RGB LEDs, where each module is controlled through an on-board WS2811 driver. It runs on 12 V DC, has an IP67 waterproof body and a 3M VHB adhesive backing, and suits decorative lighting, signage and projects that need individual color control.
Specifications
- Operating voltage
- DC 12 V
- Driver IC
- WS2811
- LED type
- Samsung 5050 SMD RGB, 3 LEDs per module
- Ingress protection
- IP67
- Dimensions
- 75 x 15 x 5 mm per module
- Beam angle
- 120°
- Operating temperature
- -20 °C to +45 °C
Frequently asked questions
What is the price of WS2811 Addressable RGB LED Module 12V 3-LED IP67 Waterproof in Egypt?
WS2811 Addressable RGB LED Module 12V 3-LED IP67 Waterproof currently costs 17 EGP in Egypt.
Where can I buy WS2811 Addressable RGB LED Module 12V 3-LED IP67 Waterproof in Egypt?
WS2811 Addressable RGB LED Module 12V 3-LED IP67 Waterproof is available from Microohm and Makers Electronics. Compare the offers above to find the best price.
How do I wire the WS2811 module?
Connect the red wire to +12 V DC, the white wire to GND and the green wire to the controller's data output. Share a common ground between the 12 V supply and the controller. When driving the data line from 3.3 V logic such as an ESP32, a level shifter may be needed.
Can I control it from an Arduino?
Yes, using a library that supports the WS2811 timing, such as FastLED or Adafruit NeoPixel. Power the modules from a 12 V supply sized for the number of modules, because the LEDs draw current from the 12 V line rather than from the Arduino.
