TMC2208 V1.2 Silent Stepper Motor Driver Module with Heat Sink
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 MicroohmCheapest | TMC2208 V1.2 Silent Stepper Motor Driver Module with Heat Sink and Screwdriver | 240 EGP300 | View in store |
 Makers Electronics | TMC2208 V1.2 Stepping Motor Mute Driver Stepstick Silent | 240 EGP | View in store |
 Future Electronics | TMC2208 V1.2 Stepper Motor Driver for 3D Printer | 290 EGP | View in store |
 UGE | TMC2208 Stepper Motor Driver Module with Heat Sink for 3D Printer | 581 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 240 EGP
About this product
The TMC2208 V1.2 is a silent stepper motor driver module in a StepStick-style board with a heat sink. It drives bipolar stepper motors with up to 1.2A continuous current, supports 256 microsteps and stealthChop mode, and is widely used in 3D printers and CNC machines. It accepts STEP and DIR signals from a controller.
Specifications
- Continuous current
- 1.2A
- Peak current
- 2A
- Supply voltage
- 4.75V to 36V
- Microstepping
- Up to 256 microsteps
- Silent mode
- stealthChop
- Control interface
- STEP / DIR / EN
- Board version
- V1.2
Frequently asked questions
What is the price of TMC2208 V1.2 Silent Stepper Motor Driver Module with Heat Sink in Egypt?
TMC2208 V1.2 Silent Stepper Motor Driver Module with Heat Sink currently costs between 240 and 581 EGP across 4 offers in Egypt.
Where can I buy TMC2208 V1.2 Silent Stepper Motor Driver Module with Heat Sink in Egypt?
TMC2208 V1.2 Silent Stepper Motor Driver Module with Heat Sink is available from Microohm, Makers Electronics, Future Electronics, and UGE. Compare the offers above to find the best price.
How do I set the motor current on the TMC2208 module?
Adjust the onboard potentiometer, which sets the reference voltage (Vref), while measuring it with a multimeter. Set the current according to your motor's rated current and the board's formula or datasheet, and stay at or below the rating. Keep the heat sink fitted at higher currents.
Does the TMC2208 work with 3.3V or 5V controllers?
Yes. The logic supply on the TMC2208 accepts 3.3V to 5V, so it can be driven from 3.3V boards such as ESP32 or from 5V boards such as Arduino UNO. Motor power is separate and must be within 4.75V to 36V. Use a common ground between the controller and the driver.
