SP485EE 5V Half-Duplex RS-485 Transceiver up to 10 Mbps
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | SP485EE RS-485/RS-422 Transceiver IC DIP-8 | 5 EGP | View in store |
 UGE | SP485EE 5V Enhanced Low Power Half-Duplex RS-485 Transceiver up to 10Mbps | 30 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 5 EGP
About this product
The SP485EE is a 5 V half-duplex transceiver that meets RS-485 and RS-422 specifications, with ESD tolerance above ±15 kV for HBM. It supports data rates up to 10 Mbps under load and uses a low-power BiCMOS design. It connects a microcontroller UART to RS-485 bus networks used in industrial and sensor systems.
Specifications
- Supply voltage
- 5 V
- Mode
- Half-duplex
- Standards
- RS-485 / RS-422
- Maximum data rate
- 10 Mbps (under load)
- ESD tolerance
- Over ±15 kV (HBM)
- Pin compatibility
- Pin-to-pin compatible with SP485
Frequently asked questions
What is the price of SP485EE 5V Half-Duplex RS-485 Transceiver up to 10 Mbps in Egypt?
SP485EE 5V Half-Duplex RS-485 Transceiver up to 10 Mbps currently costs between 5 and 30 EGP across 2 offers in Egypt.
Where can I buy SP485EE 5V Half-Duplex RS-485 Transceiver up to 10 Mbps in Egypt?
SP485EE 5V Half-Duplex RS-485 Transceiver up to 10 Mbps is available from Makers Electronics and UGE. Compare the offers above to find the best price.
How do I connect the SP485EE to a microcontroller?
Connect RO to the UART receive pin, DI to the UART transmit pin, and tie DE and RE together to a GPIO pin that sets the direction. Connect A and B to the bus, with termination at both ends of the cable.
Can it be used with a 3.3 V microcontroller?
The device is specified for a 5 V supply. Check the logic-level compatibility of your microcontroller and use a level shifter where the logic levels do not match.
