SN75176BP Differential Bus Transceiver RS-485/RS-422 DIP-8
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | SN75176BP Differential Bus Transceiver 5V 60mA IC DIP-8 | 20 EGP | View in store |
 RAM Electronics | SN75176 - Differential Bus Transceiver | 28 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 20 EGP
About this product
The SN75176BP is a differential bus transceiver for RS-485 and RS-422 networks, in an 8-pin DIP package. It enables long-distance, noise-resistant serial communication between microcontrollers and other devices on a shared bus.
Specifications
- Standard
- RS-485 / RS-422
- Package
- DIP-8
- Supply voltage
- 5 V
- Supply current
- 60 mA
- Duplex
- Half-duplex
- Type
- Differential bus transceiver
Frequently asked questions
What is the price of SN75176BP Differential Bus Transceiver RS-485/RS-422 DIP-8 in Egypt?
SN75176BP Differential Bus Transceiver RS-485/RS-422 DIP-8 currently costs between 20 and 28 EGP across 2 offers in Egypt.
Where can I buy SN75176BP Differential Bus Transceiver RS-485/RS-422 DIP-8 in Egypt?
SN75176BP Differential Bus Transceiver RS-485/RS-422 DIP-8 is available from Makers Electronics and RAM Electronics. Compare the offers above to find the best price.
How do I connect it to a microcontroller?
Connect R (pin 1) to the MCU UART RX and D (pin 4) to the UART TX. Tie DE (pin 3) and /RE (pin 2) together to control direction: high to transmit, low to receive. A (pin 6) and B (pin 7) go to the differential bus, GND to pin 5 and VCC to pin 8. If your MCU runs at 3.3 V, check the receiver output level, since VCC is 5 V.
Do I need termination resistors on the bus?
For long cables or higher data rates, standard RS-485 practice is to place a 120 Ω termination resistor at each end of the bus.
