S9014 NPN Bipolar Transistor TO-92 45V 100mA
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | S9014 NPN TO-92 Bipolar Transistors – BJT | 0.75 EGP | View in store |
 Microohm | S9014 Bipolar NPN Transistor | 1 EGP2 | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 0.75 EGP
About this product
The S9014 is a low-noise NPN bipolar junction transistor in a TO-92 package, suited to pre-amplifier and low-level signal stages. It supports a continuous collector current of 100mA and a collector-emitter voltage of 45V, with a current gain (hFE) of 60 to 1000 and a transition frequency of 150MHz. It is commonly used in audio pre-amplifiers and small switching circuits.
Specifications
- Type
- NPN bipolar junction transistor
- Package
- TO-92
- Continuous collector current (IC)
- 100 mA
- Collector-emitter voltage (VCEO)
- 45 V
- Collector-base voltage (VCBO)
- 50 V
- Current gain (hFE)
- 60 - 1000
- Transition frequency
- 150 MHz
Frequently asked questions
What is the price of S9014 NPN Bipolar Transistor TO-92 45V 100mA in Egypt?
S9014 NPN Bipolar Transistor TO-92 45V 100mA currently costs between 0.75 and 1 EGP across 2 offers in Egypt.
Where can I buy S9014 NPN Bipolar Transistor TO-92 45V 100mA in Egypt?
S9014 NPN Bipolar Transistor TO-92 45V 100mA is available from Makers Electronics and Microohm. Compare the offers above to find the best price.
What is the pinout of the S9014 in a TO-92 package?
With the flat side facing you and the leads pointing down, the pins are Emitter (left), Base (middle) and Collector (right). Confirm against the datasheet for your batch.
Can I use it to switch an LED from a microcontroller pin?
Yes, for a small load. Connect the LED and a resistor between the collector and supply, and put a base resistor (for example 1k ohm) between the microcontroller pin and the base to keep the base current sufficient.
