BC547 NPN Transistor 45V 100mA TO-92
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 RAM ElectronicsCheapest | BC547 | 0.75 EGP | View in store |
 Makers Electronics | BC547 BJT NPN Transistor 45V 100mA TO-92 | 0.75 EGP | View in store |
 Most Electronics | BC547 Transistor (45V, 0.1A) | 0.78 EGP0.87 | View in store |
 Microohm | BC547 NPN Transistor – 45V, 100 mA, TO‑92 | 0.9 EGP1 | View in store |
 Ekostra | BC547 NPN Transistor 45V 100mA (TO-92) | 1 EGP | View in store |
 UGE | BC547 | 1.25 EGP | View in store |
 Circuits Electronics | BC547 (45V, 0.1A) | 2 EGP | View in store |
 Future Electronics | BC547 Transistor (45V, 0.1A) | 2 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 0.75 EGP
About this product
The BC547 is a general-purpose NPN bipolar transistor in a TO-92 package, widely used by hobbyists for switching and amplifying small signals. Its 45 V and 100 mA ratings suit LED, small relay and logic-level switching circuits, and its compact body fits breadboards and perfboards.
Specifications
- Transistor type
- NPN
- Collector-emitter voltage (VCEO)
- 45 V
- Collector-base voltage (VCBO)
- 50 V
- Emitter-base voltage (VEBO)
- 6 V
- Collector current (IC)
- 100 mA
- Collector dissipation (Ptot)
- 500 mW
- Package
- TO-92
Frequently asked questions
What is the price of BC547 NPN Transistor 45V 100mA TO-92 in Egypt?
BC547 NPN Transistor 45V 100mA TO-92 currently costs between 0.75 and 2 EGP across 8 offers in Egypt.
Where can I buy BC547 NPN Transistor 45V 100mA TO-92 in Egypt?
BC547 NPN Transistor 45V 100mA TO-92 is available from RAM Electronics, Makers Electronics, Most Electronics, Microohm, Ekostra, UGE, Circuits Electronics, and Future Electronics. Compare the offers above to find the best price.
What is the pinout of the BC547?
With the flat side of the TO-92 case facing you and the pins pointing down, the standard order is collector, base, emitter from left to right. Verify against the datasheet of your manufacturer, as pin arrangement can vary between brands.
Do I need a resistor on the base when switching an LED?
Yes. Connect a resistor between the controlling pin and the base to limit base current, and keep the LED or load current under the 100 mA maximum. The value depends on the supply voltage and the required collector current.
