RC522 RFID Reader Module 13.56MHz SPI MFRC522
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 RAM Electronics | RC522 RFID 13.56MHz Read/Write Card Reader | 90 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 90 EGP
About this product
The RC522 is a 13.56 MHz RFID reader and writer module built around the MFRC522 chip. It communicates over SPI and reads and writes ISO 14443A cards and tags, including MIFARE-compatible ones. It is commonly used in access control and ID projects with Arduino or ESP32 boards.
Specifications
- Frequency
- 13.56 MHz
- Chip
- MFRC522
- Interface
- SPI
- Card standard
- ISO/IEC 14443 A, MIFARE compatible
- Operating voltage
- 3.3 V (logic level)
Frequently asked questions
What is the price of RC522 RFID Reader Module 13.56MHz SPI MFRC522 in Egypt?
RC522 RFID Reader Module 13.56MHz SPI MFRC522 currently costs 90 EGP in Egypt.
Where can I buy RC522 RFID Reader Module 13.56MHz SPI MFRC522 in Egypt?
RC522 RFID Reader Module 13.56MHz SPI MFRC522 is available from RAM Electronics. Compare the offers above to find the best price.
Can I connect the RC522 directly to a 5 V Arduino?
Power the module from the 3.3 V pin and keep its data pins at 3.3 V logic level. Connecting the signal pins directly to 5 V can damage the module, so use a level shifter if your board outputs 5 V logic.
How do I wire the RC522 to an Arduino Uno over SPI?
Connect SDA (SS) to pin 10, SCK to pin 13, MOSI to pin 11, MISO to pin 12, RST to pin 9, and connect GND and 3.3V. Use the SPI library and an RFID library such as MFRC522 for the code.
