NTC Thermistor 100kΩ (B3950) Glass Axial 28mm Leads
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Future Electronics | NTC Axial Thermistor 2k Ohm | 5 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 5 EGP
About this product
A glass-sealed axial NTC thermistor with a 3950 K beta value, used to measure temperature up to 200 °C. It suits detecting the temperature of a 3D printer hotend or heated bed. Its small 1.8 x 3.6 mm body and 28 mm leads make it easy to fit in tight heater assemblies.
Specifications
- Resistance
- 100 kΩ
- Beta Coefficient
- 3950 K
- Temperature Range
- -55 °C to 200 °C
- Thermal Coefficient
- 4.5 % / °C
- Dimensions
- 1.8 x 3.6 mm diameter
- Lead Length
- 28 mm
Frequently asked questions
What is the price of NTC Thermistor 100kΩ (B3950) Glass Axial 28mm Leads in Egypt?
NTC Thermistor 100kΩ (B3950) Glass Axial 28mm Leads currently costs 5 EGP in Egypt.
Where can I buy NTC Thermistor 100kΩ (B3950) Glass Axial 28mm Leads in Egypt?
NTC Thermistor 100kΩ (B3950) Glass Axial 28mm Leads is available from Future Electronics. Compare the offers above to find the best price.
How do I wire this thermistor to a controller?
An NTC thermistor is used in a voltage divider with a fixed resistor of the matching value. The divider output goes to an ADC input, and the reading must be converted to temperature using the correct table or Steinhart-Hart equation for your controller board.
The title says 2k Ohm, but the specs say 100 kΩ. Which is correct?
The listed specifications state 100 kΩ resistance with a 3950 K beta value, which is the standard profile for this type of glass-bead NTC. Confirm the resistance at 25 °C with a multimeter before using it, and make sure your firmware's thermistor table matches.
