MG90S Metal Gear Micro Servo Motor 180 Degree
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 EkostraCheapest | MG90S Micro Digital Servo Motor 180° – 2.2kg Half Metal Gear High Torque | 140 EGP | View in store |
 RAM Electronics | MG90S Micro Servo Motor 180° 2.2 kg.cm Metal Gears | 150 EGP | View in store |
 Most Electronics | Servo Motor MG90S (180) Degree (Metal Gear) | 160 EGP184 | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 140 EGP
About this product
The MG90S is a micro servo with metal gears and a 180° rotation range, used to position arms, steering linkages and small mechanisms. It is common in RC cars, mini aircraft and helicopters, and robotics projects. It is controlled by a PWM signal and operates at 4.8–6.0 V with stall torque between 2.0 and 2.5 kg/cm.
Specifications
- Dimensions
- 23 x 12.2 x 29 mm
- Operating voltage
- 4.8 – 6.0 V
- Stall torque
- 2.0 kg/cm (4.8V), 2.5 kg/cm (6.0V)
- Speed
- 0.11 sec/60° (4.8V), 0.10 sec/60° (6.0V)
- Rotation angle
- 180°
- Dead band width
- 15 µs
- Temperature range
- 0 to 55 °C
- Gears
- Metal
Frequently asked questions
What is the price of MG90S Metal Gear Micro Servo Motor 180 Degree in Egypt?
MG90S Metal Gear Micro Servo Motor 180 Degree currently costs between 140 and 160 EGP across 3 offers in Egypt.
Where can I buy MG90S Metal Gear Micro Servo Motor 180 Degree in Egypt?
MG90S Metal Gear Micro Servo Motor 180 Degree is available from Ekostra, RAM Electronics, and Most Electronics. Compare the offers above to find the best price.
How do I wire the MG90S to an Arduino?
Connect the brown or black wire to GND, the red wire to a 4.8–6.0 V supply, and the orange or yellow signal wire to a PWM-capable pin. Wire colors can vary by manufacturer, so check your servo's markings.
Can I power several servos directly from the Arduino 5V pin?
It is not recommended. Servos draw current spikes when they move, so use a dedicated 5 V supply with a common ground shared with the Arduino to avoid resets and jitter.
