LSM303DLHC Tilt-Compensated 3-Axis Compass Module
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Future Electronics | Tilt Compensated Digital Compass LSM303DLHC (3 Axis accelerometer + 3 Axis Magnetometer)) | 830 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 830 EGP
About this product
A breakout module based on the STMicroelectronics LSM303DLHC, combining a 3-axis linear accelerometer and a 3-axis magnetometer (compass) on one chip. The accelerometer compensates the compass heading for tilt, giving accurate north-referenced readings even when the board is not level. It communicates over I2C and can be powered at 3.3 V or 5 V, which suits navigation and motion detection projects.
Specifications
- Sensor IC
- LSM303DLHC
- Sensors
- 3-axis accelerometer + 3-axis magnetometer
- Interface
- I2C
- Supply voltage
- 3.3 V or 5 V
- Output
- 16-bit digital
- Temperature sensor
- Built-in
Frequently asked questions
What is the price of LSM303DLHC Tilt-Compensated 3-Axis Compass Module in Egypt?
LSM303DLHC Tilt-Compensated 3-Axis Compass Module currently costs 830 EGP in Egypt.
Where can I buy LSM303DLHC Tilt-Compensated 3-Axis Compass Module in Egypt?
LSM303DLHC Tilt-Compensated 3-Axis Compass Module is available from Future Electronics. Compare the offers above to find the best price.
What I2C addresses does it use?
Per the LSM303DLHC datasheet, the accelerometer uses 0x19 and the magnetometer uses 0x1E. Connect SDA and SCL to your MCU's I2C pins and confirm the module has pull-up resistors on both lines.
Can I use it with a 5 V Arduino?
Yes, the module can be powered at 3.3 V or 5 V. If your board is 3.3 V only, power the module from 3.3 V.
