LIZ Elec CR0603JA0472G 4.7kΩ 0603 SMD Chip Resistor 100mW ±5%
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | Chip Resistor SMD 4.7KΩ ±5 0.125W ±100ppm/℃ 0603 | 0.12 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 0.12 EGP
About this product
A 4.7 kΩ thick film surface-mount chip resistor in the 0603 package, rated 100 mW with ±5% tolerance and an operating range of -55 °C to +125 °C. It is a common pull-up value for I2C buses, pull-down resistors and voltage dividers on compact SMD boards.
Specifications
- Resistance
- 4.7 kΩ
- Tolerance
- ±5%
- Power rating
- 100 mW
- Package
- 0603
- Type
- Thick film chip resistor
- Max overload voltage
- 50 V
- Temperature coefficient
- ±200 ppm/°C
- Operating temperature
- -55 °C to +125 °C
Frequently asked questions
What is the price of LIZ Elec CR0603JA0472G 4.7kΩ 0603 SMD Chip Resistor 100mW ±5% in Egypt?
LIZ Elec CR0603JA0472G 4.7kΩ 0603 SMD Chip Resistor 100mW ±5% currently costs 0.12 EGP in Egypt.
Where can I buy LIZ Elec CR0603JA0472G 4.7kΩ 0603 SMD Chip Resistor 100mW ±5% in Egypt?
LIZ Elec CR0603JA0472G 4.7kΩ 0603 SMD Chip Resistor 100mW ±5% is available from Makers Electronics. Compare the offers above to find the best price.
Is 4.7kΩ suitable as an I2C pull-up resistor?
Yes, 4.7 kΩ is a common I2C pull-up value for short bus runs at 3.3 V or 5 V. For longer buses or higher speeds, the correct value depends on bus capacitance, so check the sensor or controller datasheet.
Is 100 mW enough for this resistor in a pull-up circuit?
Yes. Pull-up current is small, so the dissipation is far below 100 mW in typical digital circuits. For power circuits, calculate P = V²/R or P = I²R with the real operating values.
