LIZ Elec CR0603JA0204G 200kΩ 0603 SMD Chip Resistor 100mW ±5%
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | Chip Resistor SMD 200KΩ ±5 0.125W ±100ppm/℃ 0603 | 0.12 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 0.12 EGP
About this product
A 200 kΩ thick film surface-mount chip resistor in the 0603 package, rated 100 mW with ±5% tolerance and an operating range of -55 °C to +125 °C. It suits high-value bias networks, voltage dividers and pull-up applications where the current is very small. The compact 0603 size is common in dense SMD boards.
Specifications
- Resistance
- 200 kΩ
- Tolerance
- ±5%
- Power rating
- 100 mW
- Package
- 0603
- Type
- Thick film chip resistor
- Max overload voltage
- 50 V
- Temperature coefficient
- ±200 ppm/°C
- Operating temperature
- -55 °C to +125 °C
Frequently asked questions
What is the price of LIZ Elec CR0603JA0204G 200kΩ 0603 SMD Chip Resistor 100mW ±5% in Egypt?
LIZ Elec CR0603JA0204G 200kΩ 0603 SMD Chip Resistor 100mW ±5% currently costs 0.12 EGP in Egypt.
Where can I buy LIZ Elec CR0603JA0204G 200kΩ 0603 SMD Chip Resistor 100mW ±5% in Egypt?
LIZ Elec CR0603JA0204G 200kΩ 0603 SMD Chip Resistor 100mW ±5% is available from Makers Electronics. Compare the offers above to find the best price.
Is 100 mW enough for a 200kΩ resistor?
It depends on the voltage across it, because dissipation is P = V²/R. At 200 kΩ the dissipation is usually small in signal and bias circuits, but verify the calculation when the voltage is high.
Can I use it as a pull-up for a microcontroller pin?
Only in very light-load circuits. A 200 kΩ pull-up is weak and slow to pull the line high, so lower values such as 4.7 kΩ or 10 kΩ are normally used for general digital lines.
