ElectronicsEgypt
IR2113S 600V High- and Low-Side Half-Bridge Gate Driver SOIC-16

IR2113S 600V High- and Low-Side Half-Bridge Gate Driver SOIC-16

Part number: IR2113SBrand: InfineonIntegrated Circuits (ICs)

Lowest price now

85 EGP

1 offer · 1 stores

View in store: Makers Electronics

Prices updated: 13 Oct 2026

Compare prices

StorePriceView in store
Makers Electronics logoMakers Electronics85 EGPView in store

Price history

Lowest daily price, last 90 days

86.288583.7312 Oct 202613 Oct 2026

Lowest price recorded: 85 EGP

About this product

The IR2113S is a 600V high- and low-side gate driver IC for half-bridge stages built with MOSFETs or IGBTs. It provides typically 2.5A source and 2.5A sink gate current, uses a bootstrap-powered floating high-side channel, and includes undervoltage lockout on both channels. Common uses include motor drivers, inverters and switch-mode power supplies.

Specifications

Configuration
High-side and low-side half-bridge driver
Maximum voltage
600V
Gate drive supply
10V to 20V
Output current
2.5A source / 2.5A sink (typical)
Logic input compatibility
3.3V logic compatible
Package
SOIC-16 (wide body)
Protection
Undervoltage lockout on both channels

Frequently asked questions

What is the price of IR2113S 600V High- and Low-Side Half-Bridge Gate Driver SOIC-16 in Egypt?

IR2113S 600V High- and Low-Side Half-Bridge Gate Driver SOIC-16 currently costs 85 EGP in Egypt.

Where can I buy IR2113S 600V High- and Low-Side Half-Bridge Gate Driver SOIC-16 in Egypt?

IR2113S 600V High- and Low-Side Half-Bridge Gate Driver SOIC-16 is available from Makers Electronics. Compare the offers above to find the best price.

How is the high-side supply generated?

The high-side channel is powered by a bootstrap circuit: a bootstrap diode from VCC to VB and a bootstrap capacitor between VB and VS. The capacitor charges while the low-side switch is on, then supplies the high-side driver.

Can I connect the logic inputs directly to a 3.3V microcontroller?

Yes. The logic inputs are 3.3V compatible and the logic supply can range from 3.3V to 20V. Make sure the gate drive supply itself stays within 10V to 20V.