HC-SR04 Ultrasonic Distance Sensor Module 2–500 cm
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 RAM ElectronicsCheapest | Ultrasonic Sensor HC-SR04 | 40 EGP | View in store |
 Microohm | HC-SR04 Ultrasonic Range Finder Sensor | 40 EGP50 | View in store |
 Makers Electronics | HC-SR04 Ultrasonic Sensor Detector 3.3V-5V | 40 EGP | View in store |
 ElectroHub | HC-SR04 Ultrasonic Distance Sensor Module | 40 EGP50 | View in store |
 Most Electronics | HC-SR04 Ultrasonic Distance Sensor Module ( 2cm to 400cm ) | 40 EGP53.68 | View in store |
 Ekostra | HC-SR04 Ultrasonic Distance Sensor Module 2-400cm | 50 EGP | View in store |
 Circuits Electronics | Ultrasonic Sensor ( Distance Measuring Module ) | 55 EGP | View in store |
 UGE | UltraSonic Sensor HC-SR04 Support 5V and 3.3V level | 55 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 40 EGP
About this product
The HC-SR04 is an ultrasonic ranging module that measures distance by timing the echo of a 40 kHz pulse. With a range of about 2 cm to 500 cm and 1 cm resolution, it is widely used in obstacle-avoidance robots, distance alarms and level measurement projects. It has four pins: VCC, Trig, Echo and GND.
Specifications
- Power supply
- 5 V DC
- Quiescent current
- < 2 mA
- Measuring angle
- < 15°
- Ranging distance
- 2 cm – 500 cm
- Resolution
- 1 cm
- Ultrasonic frequency
- 40 kHz
- Pins
- VCC, Trig, Echo, GND
Frequently asked questions
What is the price of HC-SR04 Ultrasonic Distance Sensor Module 2–500 cm in Egypt?
HC-SR04 Ultrasonic Distance Sensor Module 2–500 cm currently costs between 40 and 55 EGP across 8 offers in Egypt.
Where can I buy HC-SR04 Ultrasonic Distance Sensor Module 2–500 cm in Egypt?
HC-SR04 Ultrasonic Distance Sensor Module 2–500 cm is available from RAM Electronics, Microohm, Makers Electronics, ElectroHub, Most Electronics, Ekostra, Circuits Electronics, and UGE. Compare the offers above to find the best price.
Can I use the HC-SR04 with a 3.3 V board like ESP32?
The Echo pin outputs 5 V logic, so use a voltage divider or a level shifter before connecting it to a 3.3 V GPIO. The Trig input generally works with 3.3 V logic.
How do I get a distance reading?
Send a trigger pulse of about 10 µs on Trig, then measure the duration of the high pulse on Echo. The distance in centimetres is roughly the echo time in microseconds divided by 58.
