ElectronicsEgypt
DS1302 Real-Time Clock IC with 31-Byte RAM (SOP-8)

DS1302 Real-Time Clock IC with 31-Byte RAM (SOP-8)

Part number: DS1302Brand: Maxim IntegratedIntegrated Circuits (ICs)

Lowest price now

18 EGP

4 offers · 4 storesSave up to 28%

View in store: Makers Electronics

Prices updated: 12 Oct 2026

Compare prices

StorePriceView in store
Makers Electronics logoMakers ElectronicsCheapest18 EGPView in store
RAM Electronics logoRAM Electronics18 EGPView in store
Future Electronics logoFuture Electronics20 EGPView in store
Microohm logoMicroohm25 EGP40View in store

Price history

Lowest daily price, last 90 days

Not enough price history yet.

Lowest price recorded: 18 EGP

About this product

The DS1302 is a real-time clock and calendar IC with 31 bytes of static RAM, controlled over a simple serial interface. It tracks seconds, minutes, hours, date, month, day, and year, and it keeps time from a backup supply when main power is removed. It is widely used in Arduino and microcontroller clock projects.

Specifications

Interface
Serial (3-wire)
Supply voltage
2.0V to 5.5V
Built-in RAM
31 bytes
Clock format
24-hour or 12-hour with AM/PM
Timekeeping crystal
32.768 kHz
Package
SOP-8

Frequently asked questions

What is the price of DS1302 Real-Time Clock IC with 31-Byte RAM (SOP-8) in Egypt?

DS1302 Real-Time Clock IC with 31-Byte RAM (SOP-8) currently costs between 18 and 25 EGP across 4 offers in Egypt.

Where can I buy DS1302 Real-Time Clock IC with 31-Byte RAM (SOP-8) in Egypt?

DS1302 Real-Time Clock IC with 31-Byte RAM (SOP-8) is available from Makers Electronics, RAM Electronics, Future Electronics, and Microohm. Compare the offers above to find the best price.

Which Arduino pins do I connect to the DS1302?

Connect VCC and GND, then connect the clock (SCLK), data (I/O), and chip enable (CE/RST) lines to three digital pins. Use a DS1302 library that matches your board.

Does it keep the time when power is off?

Yes, if a backup battery is connected to the backup supply pin, typically a 3V coin cell on modules and breakout boards. Without a backup source, the time resets when main power is removed.