CD4026 Decade Counter/Divider IC DIP-16
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | 4026 Decade Counter/Divider IC DIP-16 | 15 EGP | View in store |
 UGE | CD4026 Decade Counter IC DIP-16 | 17.1 EGP | View in store |
 Most Electronics | 4026 (Decade Counter 7-Segment Display Driver) | 18.9 EGP23.6 | View in store |
 RAM Electronics | IC 4026 - Decade Counter/Divider | 25 EGP | View in store |
 Ekostra | CD4026 Decade Counters/Dividers | 25 EGP | View in store |
 Circuits Electronics | CD 4026 Decade Counters/Dividers | 28 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 15 EGP
About this product
The CD4026 is a CMOS decade counter and divider in a 16-pin DIP package. It counts clock pulses from 0 to 9 and decodes the count to seven outputs (A to G) for driving a 7-segment display, with a carry-out pulse for cascading stages. Common uses include counters, timers and frequency dividers paired with a 555 timer or microcontroller.
Specifications
- Package
- DIP-16
- Logic family
- CMOS 4000 series
- Function
- Decade counter/divider (÷10)
- Outputs
- 7-segment decoded outputs A to G
- Carry output
- Pulse after count 9 (pin 5)
- Control pins
- CLK, INH, DEI, DEO
Frequently asked questions
What is the price of CD4026 Decade Counter/Divider IC DIP-16 in Egypt?
CD4026 Decade Counter/Divider IC DIP-16 currently costs between 15 and 28 EGP across 6 offers in Egypt.
Where can I buy CD4026 Decade Counter/Divider IC DIP-16 in Egypt?
CD4026 Decade Counter/Divider IC DIP-16 is available from Makers Electronics, UGE, Most Electronics, RAM Electronics, Ekostra, and Circuits Electronics. Compare the offers above to find the best price.
Can the CD4026 drive a 7-segment display directly?
Yes, its A to G outputs are decoded for a 7-segment display. Use a current-limiting resistor on each segment, and make sure the display type matches the output logic. Tie DEI (pin 3) high to enable the outputs.
How do I connect the clock and cascade several CD4026 chips?
Feed the clock signal to CLK (pin 1), tie INH (pin 2) to ground to enable counting, and tie DEI (pin 3) high to enable outputs. To cascade, connect the carry output CO (pin 5) to the clock input of the next CD4026.
