AT24C16N 16Kbit I2C EEPROM SMD SOIC-8
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | AT24C16N SOIC-8 EEPROM SMD IC | 20 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 20 EGP
About this product
The AT24C16N is a 16 Kbit (2K x 8) serial EEPROM with a 2-wire I2C interface. It stores settings, calibration data and other values that must survive power loss, and it is commonly used with microcontrollers and sensor projects. It operates from 1.7 V to 5.5 V and is supplied in an SOIC-8 surface-mount package.
Specifications
- Memory Size
- 16 kbit (2K x 8)
- Interface
- 2-wire I2C
- Supply Voltage
- 1.7 V to 5.5 V
- Maximum Clock Frequency
- 1 MHz
- Access Time
- 450 ns
- Operating Temperature
- -40 °C to +85 °C
- Package
- SOIC-8 (SMD)
Frequently asked questions
What is the price of AT24C16N 16Kbit I2C EEPROM SMD SOIC-8 in Egypt?
AT24C16N 16Kbit I2C EEPROM SMD SOIC-8 currently costs 20 EGP in Egypt.
Where can I buy AT24C16N 16Kbit I2C EEPROM SMD SOIC-8 in Egypt?
AT24C16N 16Kbit I2C EEPROM SMD SOIC-8 is available from Makers Electronics. Compare the offers above to find the best price.
How do I wire the AT24C16N to a microcontroller?
Connect SDA to the MCU SDA pin and SCL to the MCU SCL pin, with pull-up resistors on both lines to VCC (4.7 kΩ is a common value). Connect VCC and GND to the supply. Tie WP to GND to allow writes, or to VCC to write-protect the memory.
Can I connect several AT24C16N chips on the same I2C bus?
Check the device addressing in the datasheet first. The 16 Kbit device uses block-select bits within its I2C device address, so A0 to A2 do not work like on smaller EEPROMs. Confirm the address scheme before connecting more than one device.
