ElectronicsEgypt
74HC48 BCD to 7-Segment Decoder/Driver IC (Common Cathode)

74HC48 BCD to 7-Segment Decoder/Driver IC (Common Cathode)

Part number: 74HC48Integrated Circuits (ICs)

Lowest price now

20 EGP

3 offers · 3 storesSave up to 38%

View in store: Future Electronics

Prices updated: 14 Oct 2026

Compare prices

StorePriceView in store
Future Electronics logoFuture ElectronicsCheapest20 EGPView in store
Most Electronics logoMost Electronics27.9 EGP34.5View in store
Circuits Electronics logoCircuits Electronics32 EGPView in store

Price history

Lowest daily price, last 90 days

29.0823.9518.8213 Oct 202614 Oct 2026

Lowest price recorded: 20 EGP

About this product

The 74HC48 is a CMOS BCD-to-seven-segment decoder/driver that converts a 4-bit BCD input into the segment signals needed to show digits 0 to 9 on a seven-segment display. Its active-high outputs are designed for common-cathode displays. It is commonly used in counters, meters and digital readouts driven by BCD outputs.

Specifications

Logic family
CMOS (74HC series)
Supply voltage
2 V to 6 V
Input
4-bit BCD
Outputs
Active-high segment outputs
Display type
Common cathode
Extra control pins
Lamp test (LT), Ripple blanking input (RBI), Ripple blanking output (RBO)
Package
DIP-16

Frequently asked questions

What is the price of 74HC48 BCD to 7-Segment Decoder/Driver IC (Common Cathode) in Egypt?

74HC48 BCD to 7-Segment Decoder/Driver IC (Common Cathode) currently costs between 20 and 32 EGP across 3 offers in Egypt.

Where can I buy 74HC48 BCD to 7-Segment Decoder/Driver IC (Common Cathode) in Egypt?

74HC48 BCD to 7-Segment Decoder/Driver IC (Common Cathode) is available from Future Electronics, Most Electronics, and Circuits Electronics. Compare the offers above to find the best price.

Can I use the 74HC48 with a common-anode display?

No. The 74HC48 has active-high outputs made for common-cathode displays. For common-anode displays, use the 74HC47, which has active-low outputs.

Do I need current-limiting resistors with the 74HC48?

Yes. Each segment output needs a series resistor between the IC output and the segment LED, sized for the display current and the supply voltage used.