12V DC Songle Power Relay 10A (250VAC/28VDC) PCB Mount
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Circuits ElectronicsCheapest | 12V DC Relay (Songle) | 15 EGP | View in store |
 Future Electronics | 12V DC SONGLE Power Relay | 35 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 15 EGP
About this product
A 12 V DC coil power relay from Songle, rated to switch loads up to 10 A at 250 VAC or 28 VDC. It is designed for PCB mounting and is used to switch appliances, pumps and motors from a low-voltage control circuit. The coil must be driven through a transistor or driver, and a flyback diode should be fitted across it.
Specifications
- Coil rated voltage
- 12 V DC
- Rated load
- 10 A 250 VAC / 28 VDC
- Coil power
- 0.36 W / 0.45 W
- Contact resistance
- ≤ 100 mΩ
- Electrical life
- 100,000 cycles
- Ambient temperature
- -25 °C to +70 °C
- Mounting
- PCB
- Outline dimensions
- 19 mm x 15.5 mm x 15 mm
Frequently asked questions
What is the price of 12V DC Songle Power Relay 10A (250VAC/28VDC) PCB Mount in Egypt?
12V DC Songle Power Relay 10A (250VAC/28VDC) PCB Mount currently costs between 15 and 35 EGP across 2 offers in Egypt.
Where can I buy 12V DC Songle Power Relay 10A (250VAC/28VDC) PCB Mount in Egypt?
12V DC Songle Power Relay 10A (250VAC/28VDC) PCB Mount is available from Circuits Electronics and Future Electronics. Compare the offers above to find the best price.
Can I drive this relay directly from an Arduino pin?
Not directly. The coil draws roughly 30 to 37 mA at 12 V, which is more than a typical microcontroller pin should supply. Use an NPN transistor or MOSFET driver with a flyback diode across the coil.
Can I use it to switch mains voltage?
The contacts are rated for 250 VAC at 10 A, but mains wiring must be done inside a proper enclosure with correct insulation, spacing and fusing. If you are not experienced with mains work, have a qualified person do the wiring.
