1.5-inch 4-Pin OLED Display 128x128, SH1107, I2C
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Future ElectronicsCheapest | 1.5 inch 4PIN OLED module Display Screen SH1107 | 340 EGP | View in store |
 Circuits Electronics | 1.5 inch 4PIN OLED module Display Screen SH1107 | 410 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 340 EGP
About this product
A 1.5-inch monochrome OLED module with a 128 × 128 pixel graphic display driven by the SH1107 controller over I²C. It uses only four pins, so it connects easily to Arduino, ESP32, STM32 and Raspberry Pi boards for showing sensor readings, menus or simple graphics. The operating voltage is 3.3 V to 5 V.
Specifications
- Display size
- 1.5 inch
- Controller IC
- SH1107
- Resolution
- 128 × 128 pixels
- Color
- Monochrome (white)
- Interface
- I²C
- Operating voltage
- 3.3–5 V
- Viewing angle
- ~160°
Frequently asked questions
What is the price of 1.5-inch 4-Pin OLED Display 128x128, SH1107, I2C in Egypt?
1.5-inch 4-Pin OLED Display 128x128, SH1107, I2C currently costs between 340 and 410 EGP across 2 offers in Egypt.
Where can I buy 1.5-inch 4-Pin OLED Display 128x128, SH1107, I2C in Egypt?
1.5-inch 4-Pin OLED Display 128x128, SH1107, I2C is available from Future Electronics and Circuits Electronics. Compare the offers above to find the best price.
How do I wire the 4-pin OLED to my board?
Four-pin I²C OLED modules normally have VCC, GND, SCL and SDA. Check the silkscreen labels on your module, connect VCC within the 3.3 V to 5 V range, and connect SCL and SDA to your board's I²C pins.
Which library should I use to drive the SH1107 display?
Use a library that supports the SH1107 controller, such as Adafruit SH110X for Arduino-compatible boards, or an equivalent SH1107 driver for ESP32, STM32 or Raspberry Pi.
