0.96-inch 160x80 IPS TFT LCD Module with ST7735 Controller
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | 0.96-inch 160×80 IPS LCD Module with ST7735 Controller | 285 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 285 EGP
About this product
A 0.96-inch IPS TFT colour display with 160x80 resolution and 65K colours, driven by the ST7735 controller. It uses a 4-wire SPI interface, can be rotated horizontally or vertically, and includes an onboard 3.3V regulator and a PWM-dimmable white LED backlight. It suits small graphical interfaces, status screens and data display in microcontroller projects.
Specifications
- Display size
- 0.96 inch IPS
- Resolution
- 160 x 80
- Colour depth
- 16-bit (65K colours)
- Controller
- ST7735
- Interface
- 4-wire SPI
- Logic voltage
- 3.3 V or 5 V compatible
- Backlight
- White LED, PWM dimmable
- Display area
- 10.8 x 21.696 mm
Frequently asked questions
What is the price of 0.96-inch 160x80 IPS TFT LCD Module with ST7735 Controller in Egypt?
0.96-inch 160x80 IPS TFT LCD Module with ST7735 Controller currently costs 285 EGP in Egypt.
Where can I buy 0.96-inch 160x80 IPS TFT LCD Module with ST7735 Controller in Egypt?
0.96-inch 160x80 IPS TFT LCD Module with ST7735 Controller is available from UGE. Compare the offers above to find the best price.
How do I wire it to an Arduino or ESP32?
Connect VCC and GND, then the SPI clock and data lines, chip select, data/command, reset and backlight pins as labelled on the module, to SPI and GPIO pins on your board. Libraries such as Adafruit ST7735 or TFT_eSPI handle the drawing and need the correct pin numbers set.
Can it be powered from 5V?
Yes. The module is 5V compatible and works with 3.3V or 5V logic. The listing notes that using 5V supply gives better brightness, because the onboard 3.3V regulator is used.
