WS2812B 8-LED RGB NeoPixel Stick 5050 (5V)
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | WS2812 5050 RGB LED Driver Module Board 8 LED | 40 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 40 EGP
About this product
An 8-LED addressable RGB stick built around the WS2812 driver chip with 5050 LEDs, in the NeoPixel format. Each LED has its own driver, so the whole stick is controlled over a single data wire. It runs on 5 V and suits status indicators, lighting effects and desktop or wearable projects with Arduino or ESP32.
Specifications
- Driver chip
- WS2812 (WS2812B)
- LED package
- 5050
- Number of LEDs
- 8
- Color
- RGB
- Supply voltage
- 5 V
- Interface
- Single-wire data (DIN/DOUT)
- Board color
- Black or White
Frequently asked questions
What is the price of WS2812B 8-LED RGB NeoPixel Stick 5050 (5V) in Egypt?
WS2812B 8-LED RGB NeoPixel Stick 5050 (5V) currently costs 40 EGP in Egypt.
Where can I buy WS2812B 8-LED RGB NeoPixel Stick 5050 (5V) in Egypt?
WS2812B 8-LED RGB NeoPixel Stick 5050 (5V) is available from Makers Electronics. Compare the offers above to find the best price.
How do I wire the NeoPixel stick to an Arduino or ESP32?
Connect 5V to the 5V supply, GND to ground, and DIN to a microcontroller GPIO pin. Control it with a library such as Adafruit NeoPixel or FastLED. An ESP32 outputs 3.3 V logic, which usually works, but a level shifter improves reliability.
How much power does the stick need?
Each WS2812B LED can draw up to about 60 mA at full white, so all 8 LEDs can draw roughly 480 mA at maximum brightness. Use a supply that can deliver that current and keep brightness lower for battery-powered projects.
