Trimmer Potentiometer 3386P-1-102 1 kOhm 0.5W Single-Turn Through Hole
Prices updated: 14 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers Electronics | Trimmer Potentiometer 3386P-1-102 1kOhm 0.5W 3 Pins Through Hole | 6 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 6 EGP
About this product
A 1 kOhm single-turn Trimpot potentiometer from the sealed 3386 series, adjusted with a top screw. It is rated 0.5 W and 300 V, with three PC pins for through-hole PCB mounting. Widely used for quick calibration, setting thresholds, and tuning reference levels on circuit boards.
Specifications
- Resistance
- 1 kOhm
- Number of turns
- 1 (single turn)
- Adjustment
- Top adjustment
- Power rating
- 500 mW (1/2 W)
- Voltage rating
- 300 V
- Tolerance
- 10 %
- Temperature coefficient
- 100 PPM/°C
- Dimensions
- 9.53 x 9.53 x 4.83 mm
Frequently asked questions
What is the price of Trimmer Potentiometer 3386P-1-102 1 kOhm 0.5W Single-Turn Through Hole in Egypt?
Trimmer Potentiometer 3386P-1-102 1 kOhm 0.5W Single-Turn Through Hole currently costs 6 EGP in Egypt.
Where can I buy Trimmer Potentiometer 3386P-1-102 1 kOhm 0.5W Single-Turn Through Hole in Egypt?
Trimmer Potentiometer 3386P-1-102 1 kOhm 0.5W Single-Turn Through Hole is available from Makers Electronics. Compare the offers above to find the best price.
How do I wire the 3386P as a voltage divider?
Connect the two outer pins to supply and ground, and take the middle pin (wiper) to the node you want to set. Confirm the pinout against the Bourns 3386 datasheet before soldering.
Can it be adjusted without removing the cover?
The top adjustment screw is accessible from the top of the board, so you can calibrate it in an enclosure or after assembly. Use a small flat or Phillips screwdriver that matches the slot.
