TowerPro MG995 Metal Gear Servo 180° 13 kg·cm
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 RAM ElectronicsCheapest | MG995 Servo Motor 180° 10 kg.cm Metal Gears | 175 EGP | View in store |
 ElectroHub | MG995 High-Torque Servo Motor (Metal Gear) | 175 EGP210 | View in store |
 Most Electronics | Servo Motor MG995 180 Degree ( Metal Gear ) | 175 EGP220 | View in store |
 Makers Electronics | MG995 Servo Motor Tower Pro 180 Degree (Full Metal Gear) | 180 EGP | View in store |
 Microohm | TowerPro MG995 All Metal Gear Servo Motor 180° Rotation 11Kg/cm -Good Quality | 185 EGP220 | View in store |
 Ekostra | TowerPro MG995 Servo Motor | 220 EGP | View in store |
 Circuits Electronics | Servo Motor ( 11 kg.cm - Metal Gear) MG995 | 250 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 175 EGP
About this product
The MG995 is a standard-size servo with all-metal gears and a coreless motor, rotating about 180 degrees. It is designed for RC models, robot arms and other projects that need higher torque and shock resistance. It uses standard Futaba, Hitec, Sanwa and GWS-compatible receiver connectors and runs from 4.8 V to 7.2 V.
Specifications
- Rotation
- 180°
- Stall torque
- 13 kg·cm at 4.8 V; 15 kg·cm at 6 V
- Operating voltage
- 4.8 V – 7.2 V
- Speed
- 0.17 s/60° at 4.8 V; 0.13 s/60° at 6 V
- Dimensions
- 40 x 19 x 43 mm
- Weight
- about 69 g
- Gear type
- All metal, double ball bearing
- Connector
- Futaba / Hitec / Sanwa / GWS compatible
Frequently asked questions
What is the price of TowerPro MG995 Metal Gear Servo 180° 13 kg·cm in Egypt?
TowerPro MG995 Metal Gear Servo 180° 13 kg·cm currently costs between 175 and 250 EGP across 7 offers in Egypt.
Where can I buy TowerPro MG995 Metal Gear Servo 180° 13 kg·cm in Egypt?
TowerPro MG995 Metal Gear Servo 180° 13 kg·cm is available from RAM Electronics, ElectroHub, Most Electronics, Makers Electronics, Microohm, Ekostra, and Circuits Electronics. Compare the offers above to find the best price.
Can I power the MG995 from the Arduino 5V pin?
Not for heavy loads. The servo needs 4.8 V to 7.2 V and draws high current under load. Use a separate regulated supply, such as a 5 V to 6 V BEC, and share the ground with the controller.
How do I wire the MG995 to a microcontroller?
Use three wires: signal, power (red) and ground (brown or black). Connect the signal wire to a PWM pin such as D9 on an Arduino and control it with the Servo library. Wire colours can vary by brand, so check the sheet for your unit.
