ElectronicsEgypt
TIP122 NPN Darlington Power Transistor 100V 5A TO-220

TIP122 NPN Darlington Power Transistor 100V 5A TO-220

Part number: TIP122Transistors & MOSFETs

Lowest price now

9 EGP

7 offers · 7 storesSave up to 55%

View in store: Makers Electronics

Prices updated: 13 Oct 2026

Compare prices

StorePriceView in store
Makers Electronics logoMakers ElectronicsCheapest9 EGPView in store
Most Electronics logoMost Electronics9.9 EGP11.71View in store
UGE logoUGE11.5 EGPView in store
Future Electronics logoFuture Electronics12 EGPView in store
Ekostra logoEkostra15 EGPView in store
RAM Electronics logoRAM Electronics15 EGPView in store
Circuits Electronics logoCircuits Electronics20 EGPView in store

Price history

Lowest daily price, last 90 days

9.1498.8712 Oct 202613 Oct 2026

Lowest price recorded: 9 EGP

About this product

The TIP122 is an NPN Darlington power transistor in a TO-220 package, combining two transistors to give very high current gain. It suits driving relays, solenoids, small DC motors and LED loads from low-current signals such as microcontroller outputs. It is typically used with a base resistor and a flyback diode for inductive loads.

Specifications

Transistor type
NPN Darlington
Collector current (Ic max)
5 A
Collector-emitter voltage (Vceo max)
100 V
Power dissipation
2 W (ambient), 65 W (case)
Package
TO-220

Frequently asked questions

What is the price of TIP122 NPN Darlington Power Transistor 100V 5A TO-220 in Egypt?

TIP122 NPN Darlington Power Transistor 100V 5A TO-220 currently costs between 9 and 20 EGP across 7 offers in Egypt.

Where can I buy TIP122 NPN Darlington Power Transistor 100V 5A TO-220 in Egypt?

TIP122 NPN Darlington Power Transistor 100V 5A TO-220 is available from Makers Electronics, Most Electronics, UGE, Future Electronics, Ekostra, RAM Electronics, and Circuits Electronics. Compare the offers above to find the best price.

Does the TIP122 need a base resistor?

Yes. Connect a resistor between the driving pin and the base to limit base current. Darlington transistors have a higher base-emitter drop (around 1.5 to 2.5 V), so check that your drive voltage is sufficient to fully turn it on.

Is a flyback diode needed with TIP122?

When switching inductive loads such as relays, solenoids or motors, place a flyback diode (for example 1N4007) across the load to protect the transistor from voltage spikes.