STM32F103C8T6 Blue Pill Development Board (ARM Cortex-M3)
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Most ElectronicsCheapest | STM32F103C8T6 ARM STM32 Development Board (The Blue Pill) | 199 EGP263 | View in store |
 Circuits Electronics | STM32F103C8T6 - STM32 Development Board (The Blue Pill) | 220 EGP | View in store |
 Ekostra | STM32F103C8T6 32-Bit ARM Development Board | 250 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 199 EGP
About this product
The STM32F103C8T6 Blue Pill is a low-cost development board built around the 32-bit ARM Cortex-M3 microcontroller running at up to 72 MHz. It provides 64 KB of flash, 20 KB of SRAM and a broad set of peripherals, including USB 2.0 Full Speed, I2C, SPI and USART, making it suited to embedded systems, robotics and real-time control projects.
Specifications
- Core
- ARM Cortex-M3 32-bit
- Operating frequency
- 72 MHz
- Flash memory
- 64 KB
- SRAM
- 20 KB
- Interfaces
- 2 x I2C, 2 x SPI, 3 x USART, 1 x USB 2.0 Full Speed
- Operating voltage
- 2.0 V to 3.6 V
- Power supply options
- 5 V via USB or 3.3 V via onboard pin
- Board size
- 5.3 cm x 2.2 cm
Frequently asked questions
What is the price of STM32F103C8T6 Blue Pill Development Board (ARM Cortex-M3) in Egypt?
STM32F103C8T6 Blue Pill Development Board (ARM Cortex-M3) currently costs between 199 and 250 EGP across 3 offers in Egypt.
Where can I buy STM32F103C8T6 Blue Pill Development Board (ARM Cortex-M3) in Egypt?
STM32F103C8T6 Blue Pill Development Board (ARM Cortex-M3) is available from Most Electronics, Circuits Electronics, and Ekostra. Compare the offers above to find the best price.
How do I program the STM32F103C8T6 Blue Pill?
You can flash it through the USB port using the built-in ROM USB DFU bootloader (set the BOOT0 jumper to 1 before reset), or use an ST-Link programmer connected to the SWD pins. Arduino IDE users can program it after adding the STM32duino core.
Are the I/O pins 5 V tolerant?
The microcontroller uses 3.3 V logic. Some I/O pins are 5 V tolerant according to the STM32F103 datasheet, so check the pinout before connecting 5 V signals and use a level shifter where needed.
