Standard Servo Motor 1.3 kg·cm (Analog, Plastic Gear)
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Circuits Electronics | Servo Motor (1.3 Kg.cm - Standard) | 85 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 85 EGP
About this product
A standard analog servo motor with plastic gears, rated for 1.3 kg·cm stall torque at 4.8 V and a 120° rotation range. It is designed for robotic and hobby projects that need light, controlled angular movement and operates from 4.8 V to 6 V.
Specifications
- Operating voltage
- 4.8 V – 6 V
- Stall torque
- 1.3 kg·cm at 4.8 V, 1.5 kg·cm at 6 V
- Operating speed
- 0.12 s/60° at 4.8 V, 0.10 s/60° at 6 V
- Control system
- Analog (تناظري)
- Operating angle
- 120°
- Required pulse
- 900 µs – 2100 µs
- Gear type
- Plastic (بلاستيك)
- Weight
- 9 g (9 جرامات)
Frequently asked questions
What is the price of Standard Servo Motor 1.3 kg·cm (Analog, Plastic Gear) in Egypt?
Standard Servo Motor 1.3 kg·cm (Analog, Plastic Gear) currently costs 85 EGP in Egypt.
Where can I buy Standard Servo Motor 1.3 kg·cm (Analog, Plastic Gear) in Egypt?
Standard Servo Motor 1.3 kg·cm (Analog, Plastic Gear) is available from Circuits Electronics. Compare the offers above to find the best price.
How do I wire it to an Arduino?
Connect the red wire to a 5 V supply (or an external supply within 4.8 V to 6 V), the brown or black wire to GND, and the signal wire (commonly orange, yellow or white) to a PWM pin. Share ground between the servo and the controller. The listing does not state wire colours, so verify them on your unit.
Can I power it from batteries?
Yes, as long as the supply stays within 4.8 V to 6 V, for example four AA cells. Make sure the supply can deliver enough current when the servo is under load, and use a separate supply rather than the Arduino 5 V pin for heavy loads.
