S9013 NPN Transistor TO-92 General Purpose 500mA 25V
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Makers ElectronicsCheapest | S9013 NPN Small Signal Transistor | 0.75 EGP | View in store |
 Microohm | S9013 NPN Transistor | 1 EGP2 | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 0.75 EGP
About this product
The S9013 is a general-purpose NPN bipolar transistor in a TO-92 package, used for switching and small-signal amplification. With a transition frequency of 140 MHz and a continuous collector current of 500 mA, it suits audio preamplifier stages, LED and small relay driver circuits, and low-power switching.
Specifications
- Type
- NPN
- Collector-emitter voltage
- 25 V
- Collector-base voltage
- 45 V
- Emitter-base voltage
- 5 V
- Continuous collector current
- 500 mA
- Transition frequency
- 140 MHz
- Package
- TO-92
Frequently asked questions
What is the price of S9013 NPN Transistor TO-92 General Purpose 500mA 25V in Egypt?
S9013 NPN Transistor TO-92 General Purpose 500mA 25V currently costs between 0.75 and 1 EGP across 2 offers in Egypt.
Where can I buy S9013 NPN Transistor TO-92 General Purpose 500mA 25V in Egypt?
S9013 NPN Transistor TO-92 General Purpose 500mA 25V is available from Makers Electronics and Microohm. Compare the offers above to find the best price.
What is the pinout of the S9013?
With the flat side of the TO-92 package facing you and the leads pointing down, the pins from left to right are Emitter, Base and Collector (pin 1 Emitter, pin 2 Base, pin 3 Collector).
How do I drive a relay or LED with it?
Use a base resistor to limit the base current and connect the load between the supply and the collector, with the emitter to ground for an NPN switch. For loads close to 500 mA, check the datasheet for saturation and gain values, and add a flyback diode across any relay coil.
