Raspberry Pi Pico (RP2040) Microcontroller Board
Prices updated: 13 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 Most ElectronicsCheapest | Raspberry Pi Pico 2 | 550 EGP1,000 | View in store |
 Ekostra | Raspberry Pi Pico (RP2040) | 560 EGP | View in store |
 Circuits Electronics | Raspberry Pi Pico | 600 EGP | View in store |
 Future Electronics | Raspberry Pi Pico RP2020 | 750 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 550 EGP
About this product
Raspberry Pi Pico is a compact low-cost board built around the RP2040 microcontroller, a dual-core Arm Cortex-M0+ chip with 264 KB of SRAM and Programmable I/O (PIO) for custom digital interfaces. It suits embedded projects, learning and prototyping, and can be programmed in C/C++ or MicroPython. The listing title reads RP2020, which is the RP2040 chip.
Specifications
- Microcontroller
- RP2040 (dual-core Arm Cortex-M0+)
- Clock speed
- 133 MHz
- SRAM
- 264 KB
- Onboard flash
- 2 MB
- GPIO pins
- 26 multi-function (3 ADC)
- Logic level
- 3.3 V
- Programmable I/O
- PIO (8 state machines)
Frequently asked questions
What is the price of Raspberry Pi Pico (RP2040) Microcontroller Board in Egypt?
Raspberry Pi Pico (RP2040) Microcontroller Board currently costs between 550 and 750 EGP across 4 offers in Egypt.
Where can I buy Raspberry Pi Pico (RP2040) Microcontroller Board in Egypt?
Raspberry Pi Pico (RP2040) Microcontroller Board is available from Most Electronics, Ekostra, Circuits Electronics, and Future Electronics. Compare the offers above to find the best price.
Can I connect 5 V sensors directly to the Pico?
No. The RP2040 GPIO pins operate at 3.3 V and are not 5 V tolerant. Use a level shifter for 5 V signals. The board itself is powered through its micro-USB or VSYS pin, and its 3V3 output is for 3.3 V devices.
How do I program the Raspberry Pi Pico?
You can program it in MicroPython or C/C++. Hold the BOOTSEL button while plugging in the USB cable to mount it as a drive, then copy a UF2 firmware file or use the Thonny IDE for MicroPython.
