Nokia 5110 84x84 Graphic LCD Module with SPI Interface
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 UGE | Nokia 5110 LCD Screen module | 137 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 137 EGP
About this product
A monochrome 84 x 84 dot-matrix graphic LCD module, widely known as the Nokia 5110 display, controlled over SPI. It shows four lines of text with 12 characters per line and suits Arduino, Raspberry Pi and ARM projects. The module runs on 2.7 to 3.3 V, so it needs level shifting when used with 5 V boards.
Specifications
- Display type
- Monochrome graphic LCD, 84 x 84 dots / شاشة LCD رسومية أحادية اللون 84 × 84 نقطة
- Interface
- SPI / SPI
- Controller
- PCD8544 / PCD8544
- Supply voltage
- 2.7 – 3.3 V / 2.7 – 3.3 فولت
- Backlight voltage
- 3.3 V max / 3.3 فولت كحد أقصى
- Text capacity
- 4 lines × 12 characters / 4 أسطر × 12 حرفاً
- Module size
- 43.6 × 43.1 mm / 43.6 × 43.1 مم
- Maximum transfer rate
- 4 Mbps / 4 ميغابت في الثانية
Frequently asked questions
What is the price of Nokia 5110 84x84 Graphic LCD Module with SPI Interface in Egypt?
Nokia 5110 84x84 Graphic LCD Module with SPI Interface currently costs 137 EGP in Egypt.
Where can I buy Nokia 5110 84x84 Graphic LCD Module with SPI Interface in Egypt?
Nokia 5110 84x84 Graphic LCD Module with SPI Interface is available from UGE. Compare the offers above to find the best price.
Can I connect this display directly to a 5 V Arduino Uno?
Not safely. The module is rated for 2.7 to 3.3 V, so use a 3.3 V board or a logic level converter on the data and control lines, and power the module from 3.3 V.
Which pins do I need to wire?
The usual Nokia 5110 wiring uses VCC, GND, SCE (chip select), RST (reset), D/C (data/command), DN (MOSI), SCLK (clock) and LED (backlight). Check the labels printed on your module, as pin order can vary between boards.
