Mini Push Button 4-Pin 6x6x7.5mm Tactile Switch, Through-Hole
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
| EkostraCheapest | Mini Push Button 4-Pin 6x6x7.5mm | 1 EGP | View in store |
 Makers Electronics | Mini Push Button 4 Pin 6x6x7.5mm | 1 EGP | View in store |
Price history
Lowest daily price, last 90 days
Lowest price recorded: 1 EGP
About this product
This 4-pin mini push button is a momentary tactile switch with a 6 x 6 mm footprint and 7.5 mm height. It is made for through-hole PCB mounting and is rated 12 V DC, 50 mA. It is commonly used on prototype boards and in control panels for reset, mode and input buttons.
Specifications
- Type
- Momentary tactile push button
- Pins
- 4
- Size
- 6 x 6 mm
- Height
- 7.5 mm
- Rating
- 12 V DC, 50 mA
- Actuation force
- 250 gf
- Mounting
- Through-hole PCB
Frequently asked questions
What is the price of Mini Push Button 4-Pin 6x6x7.5mm Tactile Switch, Through-Hole in Egypt?
Mini Push Button 4-Pin 6x6x7.5mm Tactile Switch, Through-Hole currently costs 1 EGP in Egypt.
Where can I buy Mini Push Button 4-Pin 6x6x7.5mm Tactile Switch, Through-Hole in Egypt?
Mini Push Button 4-Pin 6x6x7.5mm Tactile Switch, Through-Hole is available from Ekostra and Makers Electronics. Compare the offers above to find the best price.
Which pins are connected to each other?
The four pins are internally bridged in pairs on each side. Pressing the button connects the two sides, so use one pin from each side. Verify with a multimeter in continuity mode before wiring.
Can it be used with a 5 V Arduino input?
Its rating of 12 V DC and 50 mA covers typical 5 V logic inputs. Use an internal pull-up (INPUT_PULLUP) or an external pull-up resistor so the input reads a clear HIGH or LOW.
