MAX98357A I2S 3W Class D Mono Amplifier Module (Unassembled)
Prices updated: 12 Oct 2026
Compare prices
| Store | product | Price | View in store |
|---|---|---|---|
 MicroohmCheapest | MAX98357A I2S 3W Class D Amplifier Module | 150 EGP200 | View in store |
 UGE | MAX98357A I2S 3W Class D Amplifier DAC Module | 220 EGP | View in store |
Price history
Lowest daily price, last 90 days
Not enough price history yet.
Lowest price recorded: 150 EGP
About this product
A breakout module built around the MAX98357A, which accepts digital I2S audio and drives a mono 4 Ω speaker through a Class D amplifier. It operates from 2.5-5.5 V and delivers up to 3.2 W into a 4 Ω speaker at 5 V. The module ships unassembled, so the screw terminal and pin header must be soldered before use.
Specifications
- Digital audio interface
- I2S
- Amplifier class
- Class D
- Channel
- Mono
- Supply voltage
- 2.5-5.5 V
- Output power
- Up to 3.2 W into 4 Ω at 5 V
- Speaker impedance
- 4 Ω
- Assembly status
- Unassembled (screw terminal and pin header not soldered)
Frequently asked questions
What is the price of MAX98357A I2S 3W Class D Mono Amplifier Module (Unassembled) in Egypt?
MAX98357A I2S 3W Class D Mono Amplifier Module (Unassembled) currently costs between 150 and 220 EGP across 2 offers in Egypt.
Where can I buy MAX98357A I2S 3W Class D Mono Amplifier Module (Unassembled) in Egypt?
MAX98357A I2S 3W Class D Mono Amplifier Module (Unassembled) is available from Microohm and UGE. Compare the offers above to find the best price.
How do I wire this module to an ESP32 or Raspberry Pi?
Connect the I2S bit clock (BCLK) and word select (LRC/WS) lines from the controller, the serial data line to DIN, and power VIN and GND. Use the I2S pins of your board and the matching audio library or driver.
Can I use an 8 Ω speaker instead of 4 Ω?
You can, but the 3.2 W rating is specified for a 4 Ω load at 5 V. An 8 Ω speaker at the same supply will deliver less output power and may sound quieter.
